2013-06-05 23:53:30 +00:00
|
|
|
################################################################################
|
2003-12-03 22:58:26 +00:00
|
|
|
#
|
|
|
|
|
# python
|
|
|
|
|
#
|
2013-06-05 23:53:30 +00:00
|
|
|
################################################################################
|
2013-06-05 23:53:25 +00:00
|
|
|
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
PYTHON_VERSION_MAJOR = 2.7
|
2019-10-20 11:15:41 +03:00
|
|
|
PYTHON_VERSION = $(PYTHON_VERSION_MAJOR).17
|
.mk files: bulk aligment and whitespace cleanup of assignments
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-10-07 09:06:03 +02:00
|
|
|
PYTHON_SOURCE = Python-$(PYTHON_VERSION).tar.xz
|
2017-10-14 14:40:00 +02:00
|
|
|
PYTHON_SITE = https://python.org/ftp/python/$(PYTHON_VERSION)
|
2017-04-09 14:04:15 +05:30
|
|
|
PYTHON_LICENSE = Python-2.0, others
|
2012-11-13 01:05:57 +00:00
|
|
|
PYTHON_LICENSE_FILES = LICENSE
|
2014-12-28 21:54:54 +01:00
|
|
|
PYTHON_LIBTOOL_PATCH = NO
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
|
2014-02-13 21:48:53 +01:00
|
|
|
# Python needs itself to be built, so in order to cross-compile
|
|
|
|
|
# Python, we need to build a host Python first. This host Python is
|
|
|
|
|
# also installed in $(HOST_DIR), as it is needed when cross-compiling
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
# third-party Python modules.
|
|
|
|
|
|
2017-04-21 11:24:48 -04:00
|
|
|
HOST_PYTHON_CONF_OPTS += \
|
|
|
|
|
--enable-static \
|
|
|
|
|
--without-cxx-main \
|
|
|
|
|
--disable-sqlite3 \
|
|
|
|
|
--disable-tk \
|
|
|
|
|
--with-expat=system \
|
|
|
|
|
--disable-curses \
|
|
|
|
|
--disable-codecs-cjk \
|
|
|
|
|
--disable-nis \
|
|
|
|
|
--enable-unicodedata \
|
|
|
|
|
--disable-dbm \
|
|
|
|
|
--disable-gdbm \
|
|
|
|
|
--disable-bsddb \
|
|
|
|
|
--disable-test-modules \
|
|
|
|
|
--disable-bz2 \
|
|
|
|
|
--disable-ossaudiodev \
|
2014-02-13 21:48:53 +01:00
|
|
|
--disable-pyo-build
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
|
2014-03-05 00:29:49 +01:00
|
|
|
# Make sure that LD_LIBRARY_PATH overrides -rpath.
|
|
|
|
|
# This is needed because libpython may be installed at the same time that
|
|
|
|
|
# python is called.
|
2016-08-31 22:38:28 +02:00
|
|
|
# Make python believe we don't have 'hg' and 'svn', so that it doesn't
|
|
|
|
|
# try to communicate over the network during the build.
|
2014-03-05 00:29:49 +01:00
|
|
|
HOST_PYTHON_CONF_ENV += \
|
2016-08-31 22:38:28 +02:00
|
|
|
LDFLAGS="$(HOST_LDFLAGS) -Wl,--enable-new-dtags" \
|
|
|
|
|
ac_cv_prog_HAS_HG=/bin/false \
|
|
|
|
|
ac_cv_prog_SVNVERSION=/bin/false
|
2014-03-05 00:29:49 +01:00
|
|
|
|
2012-12-15 07:29:38 +00:00
|
|
|
# Building host python in parallel sometimes triggers a "Bus error"
|
|
|
|
|
# during the execution of "./python setup.py build" in the
|
|
|
|
|
# installation step. It is probably due to the installation of a
|
|
|
|
|
# shared library taking place in parallel to the execution of
|
|
|
|
|
# ./python, causing spurious Bus error. Building host-python with
|
|
|
|
|
# MAKE1 has shown to workaround the problem.
|
|
|
|
|
HOST_PYTHON_MAKE = $(MAKE1)
|
|
|
|
|
|
2017-07-04 12:34:29 +02:00
|
|
|
PYTHON_DEPENDENCIES = host-python libffi $(TARGET_NLS_DEPENDENCIES)
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
|
2012-01-04 12:30:01 +01:00
|
|
|
HOST_PYTHON_DEPENDENCIES = host-expat host-zlib
|
2011-01-27 23:37:22 +01:00
|
|
|
|
2019-09-20 14:59:39 +00:00
|
|
|
ifeq ($(BR2_PACKAGE_HOST_PYTHON_SSL),y)
|
|
|
|
|
HOST_PYTHON_DEPENDENCIES += host-openssl
|
|
|
|
|
else
|
2020-02-03 12:18:37 +01:00
|
|
|
HOST_PYTHON_CONF_OPTS += --disable-ssl
|
2019-09-20 14:59:39 +00:00
|
|
|
endif
|
|
|
|
|
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
PYTHON_INSTALL_STAGING = YES
|
2008-01-17 12:42:53 +00:00
|
|
|
|
|
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_READLINE),y)
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
PYTHON_DEPENDENCIES += readline
|
2017-03-08 00:00:27 +01:00
|
|
|
else
|
|
|
|
|
PYTHON_CONF_OPTS += --disable-readline
|
2008-01-17 12:42:53 +00:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_CURSES),y)
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
PYTHON_DEPENDENCIES += ncurses
|
2008-01-17 12:42:53 +00:00
|
|
|
else
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --disable-curses
|
2008-01-17 12:42:53 +00:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_PYEXPAT),y)
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
PYTHON_DEPENDENCIES += expat
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --with-expat=system
|
2008-01-17 12:42:53 +00:00
|
|
|
else
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --with-expat=none
|
2008-01-17 12:42:53 +00:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_BSDDB),y)
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
PYTHON_DEPENDENCIES += berkeleydb
|
2008-01-17 12:42:53 +00:00
|
|
|
else
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --disable-bsddb
|
2008-01-17 12:42:53 +00:00
|
|
|
endif
|
|
|
|
|
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_SQLITE),y)
|
|
|
|
|
PYTHON_DEPENDENCIES += sqlite
|
2008-01-17 12:42:53 +00:00
|
|
|
else
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --disable-sqlite3
|
2008-01-17 12:42:53 +00:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_SSL),y)
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
PYTHON_DEPENDENCIES += openssl
|
|
|
|
|
else
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --disable-ssl
|
2008-01-17 12:42:53 +00:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifneq ($(BR2_PACKAGE_PYTHON_CODECSCJK),y)
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --disable-codecs-cjk
|
2008-01-17 12:42:53 +00:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifneq ($(BR2_PACKAGE_PYTHON_UNICODEDATA),y)
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --disable-unicodedata
|
2008-01-17 12:42:53 +00:00
|
|
|
endif
|
2007-01-23 17:18:54 +00:00
|
|
|
|
2014-01-07 22:34:07 -06:00
|
|
|
# Default is UCS2 w/o a conf opt
|
|
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_UCS4),y)
|
2017-02-22 14:14:23 +11:00
|
|
|
# host-python must have the same UCS2/4 configuration as the target
|
|
|
|
|
# python
|
|
|
|
|
HOST_PYTHON_CONF_OPTS += --enable-unicode=ucs4
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --enable-unicode=ucs4
|
2014-01-07 22:34:07 -06:00
|
|
|
endif
|
|
|
|
|
|
2020-02-22 19:54:59 +01:00
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_2TO3),y)
|
|
|
|
|
PYTHON_CONF_OPTS += --enable-lib2to3
|
|
|
|
|
else
|
|
|
|
|
PYTHON_CONF_OPTS += --disable-lib2to3
|
|
|
|
|
endif
|
|
|
|
|
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_BZIP2),y)
|
|
|
|
|
PYTHON_DEPENDENCIES += bzip2
|
|
|
|
|
else
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --disable-bz2
|
2008-02-06 00:55:05 +00:00
|
|
|
endif
|
2009-01-17 00:19:06 +00:00
|
|
|
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_ZLIB),y)
|
|
|
|
|
PYTHON_DEPENDENCIES += zlib
|
|
|
|
|
else
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += --disable-zlib
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
endif
|
|
|
|
|
|
2012-08-13 04:19:37 +00:00
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_HASHLIB),y)
|
|
|
|
|
PYTHON_DEPENDENCIES += openssl
|
2017-03-08 00:00:27 +01:00
|
|
|
else
|
|
|
|
|
PYTHON_CONF_OPTS += --disable-hashlib
|
2012-08-13 04:19:37 +00:00
|
|
|
endif
|
|
|
|
|
|
2015-01-10 16:19:26 +01:00
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_OSSAUDIODEV),y)
|
|
|
|
|
PYTHON_CONF_OPTS += --enable-ossaudiodev
|
|
|
|
|
else
|
|
|
|
|
PYTHON_CONF_OPTS += --disable-ossaudiodev
|
|
|
|
|
endif
|
|
|
|
|
|
2016-08-31 22:38:28 +02:00
|
|
|
# Make python believe we don't have 'hg' and 'svn', so that it doesn't
|
|
|
|
|
# try to communicate over the network during the build.
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
PYTHON_CONF_ENV += \
|
2014-02-13 21:48:53 +01:00
|
|
|
ac_cv_have_long_long_format=yes \
|
|
|
|
|
ac_cv_file__dev_ptmx=yes \
|
2014-07-09 11:38:59 +01:00
|
|
|
ac_cv_file__dev_ptc=yes \
|
2016-08-31 22:38:28 +02:00
|
|
|
ac_cv_working_tzset=yes \
|
|
|
|
|
ac_cv_prog_HAS_HG=/bin/false \
|
|
|
|
|
ac_cv_prog_SVNVERSION=/bin/false
|
2013-12-22 18:02:10 +01:00
|
|
|
|
2016-11-09 10:25:07 +01:00
|
|
|
# GCC is always compliant with IEEE754
|
|
|
|
|
ifeq ($(BR2_ENDIAN),"LITTLE")
|
|
|
|
|
PYTHON_CONF_ENV += ac_cv_little_endian_double=yes
|
|
|
|
|
else
|
|
|
|
|
PYTHON_CONF_ENV += ac_cv_big_endian_double=yes
|
|
|
|
|
endif
|
|
|
|
|
|
2014-09-27 21:32:44 +02:00
|
|
|
PYTHON_CONF_OPTS += \
|
2017-04-21 11:24:48 -04:00
|
|
|
--without-cxx-main \
|
|
|
|
|
--without-doc-strings \
|
|
|
|
|
--with-system-ffi \
|
|
|
|
|
--disable-pydoc \
|
|
|
|
|
--disable-test-modules \
|
|
|
|
|
--disable-gdbm \
|
|
|
|
|
--disable-tk \
|
|
|
|
|
--disable-nis \
|
|
|
|
|
--disable-dbm \
|
|
|
|
|
--disable-pyo-build \
|
2016-05-17 23:19:15 +02:00
|
|
|
--disable-pyc-build
|
2014-02-13 21:48:53 +01:00
|
|
|
|
|
|
|
|
# This is needed to make sure the Python build process doesn't try to
|
|
|
|
|
# regenerate those files with the pgen program. Otherwise, it builds
|
|
|
|
|
# pgen for the target, and tries to run it on the host.
|
|
|
|
|
|
|
|
|
|
define PYTHON_TOUCH_GRAMMAR_FILES
|
|
|
|
|
touch $(@D)/Include/graminit.h $(@D)/Python/graminit.c
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
PYTHON_POST_PATCH_HOOKS += PYTHON_TOUCH_GRAMMAR_FILES
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Remove useless files. In the config/ directory, only the Makefile
|
|
|
|
|
# and the pyconfig.h files are needed at runtime.
|
|
|
|
|
#
|
2013-07-10 15:39:17 -03:00
|
|
|
# idle & smtpd.py have bad shebangs and are mostly samples
|
|
|
|
|
#
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
define PYTHON_REMOVE_USELESS_FILES
|
2013-06-30 21:29:08 +02:00
|
|
|
rm -f $(TARGET_DIR)/usr/bin/python$(PYTHON_VERSION_MAJOR)-config
|
|
|
|
|
rm -f $(TARGET_DIR)/usr/bin/python2-config
|
|
|
|
|
rm -f $(TARGET_DIR)/usr/bin/python-config
|
2013-07-10 15:39:17 -03:00
|
|
|
rm -f $(TARGET_DIR)/usr/bin/smtpd.py
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
for i in `find $(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/config/ \
|
|
|
|
|
-type f -not -name pyconfig.h -a -not -name Makefile` ; do \
|
|
|
|
|
rm -f $$i ; \
|
|
|
|
|
done
|
|
|
|
|
endef
|
2009-01-17 00:19:06 +00:00
|
|
|
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
PYTHON_POST_INSTALL_TARGET_HOOKS += PYTHON_REMOVE_USELESS_FILES
|
2009-01-17 00:19:06 +00:00
|
|
|
|
2014-02-18 21:40:07 +01:00
|
|
|
#
|
|
|
|
|
# Make sure libpython gets stripped out on target
|
|
|
|
|
#
|
|
|
|
|
define PYTHON_ENSURE_LIBPYTHON_STRIPPED
|
|
|
|
|
chmod u+w $(TARGET_DIR)/usr/lib/libpython$(PYTHON_VERSION_MAJOR)*.so
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
PYTHON_POST_INSTALL_TARGET_HOOKS += PYTHON_ENSURE_LIBPYTHON_STRIPPED
|
|
|
|
|
|
2014-03-05 23:04:40 +01:00
|
|
|
# Always install the python symlink in the target tree
|
|
|
|
|
define PYTHON_INSTALL_TARGET_PYTHON_SYMLINK
|
|
|
|
|
ln -sf python2 $(TARGET_DIR)/usr/bin/python
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
PYTHON_POST_INSTALL_TARGET_HOOKS += PYTHON_INSTALL_TARGET_PYTHON_SYMLINK
|
|
|
|
|
|
|
|
|
|
# Always install the python-config symlink in the staging tree
|
|
|
|
|
define PYTHON_INSTALL_STAGING_PYTHON_CONFIG_SYMLINK
|
|
|
|
|
ln -sf python2-config $(STAGING_DIR)/usr/bin/python-config
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
PYTHON_POST_INSTALL_STAGING_HOOKS += PYTHON_INSTALL_STAGING_PYTHON_CONFIG_SYMLINK
|
|
|
|
|
|
python: convert to autotargets, bump to 2.7.1, many improvements
This commit does a number of changes and improvements to the Python
interpreter package :
* It converts the .mk file to the AUTOTARGETS infrastructure. Even
though Python uses only autoconf and not automake, the AUTOTARGETS
is a fairly good fit for the Python interpreter, so we make use of
it.
* It bumps the version to 2.7.1. As this is a minor release compared
to 2.7, there are no particular changes needed because of this
bump. All changes done to the package are cleanups and improvements
unrelated to the version bump.
* It uses the system libffi. Until now, Python was building its own
libffi (a library used by interprets to build code that makes
function call at runtime). Using the Python internal libffi was not
working as Python was not passing the appropriate arguments down to
libffi ./configure script. And it sounded better to use a
system-wide libffi, that could potentially be used by other
packages as well. This libffi is needed for the ctypes Python
module.
* Remove all "depends on BR2_PACKAGE_PYTHON" by moving all
Python-related options under a "if BR2_PACKAGE_PYTHON ... endif"
condition.
* Make the installation of pre-compiled Python modules (.pyc) the
default, since they are smaller and do not need to be compiled on
the target. It is still possible to install uncompiled modules, or
both the uncompiled and pre-compiled versions.
* The options to select the set of Python modules to compile has been
moved to a submenu.
* The codecscjk (Japanese, Korean and Chinese codecs) module is no
longer enabled by default.
* The commented options for gdbm and nis in Python have been
removed. Those were not supported, so let's get rid of unused code.
* The option for the tkinker module in Python has been removed, since
we don't have a package for Tk in Buildroot.
* Options for the bzip2, sqlite and zlib modules have been added,
since those modules have external dependencies.
* The set of patches has been completely reworked and extended, with
more fine-grained patches and newer functionalities. The patches
are split in two categories:
- Patches that make various modifications to the Python build
system to support cross-compilation or make some minor
modifications. Those patches are numbered from 0 to 100.
- Patches that add configuration options to the Python build
system in order to enable/disable the compilation of Python
extensions or modules (test modules, pydoc, lib2to3, sqlite, tk,
curses, expat, codecs-cjk, nis, unicodedata, database modules,
ssl, bzip2, zlib). These patches are numbered from 100 to 200.
All features of the previous four patches are preserved, but they
are organized differently and the patches have been renamed. This
makes it difficult to see the differences from the existing
patches.
* The host Python interpreter is now installed in $(HOST_DIR), since
it is used to build third party Python modules.
* The BR2_PACKAGE_PYTHON_DEV option is removed since
BR2_HAVE_DEVFILES already does the necessary work.
* The "make -i install" workaround introduced by Maxime Ripard is no
longer needed. It was caused by the compilation of the tests that
required the unicodedata module (which wasn't built in the host
Python interpreter). Since we no longer compile the Python tests,
the problem doesn't exist anymore and we can avoid this "-i"
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-12-26 10:28:49 +01:00
|
|
|
PYTHON_AUTORECONF = YES
|
2009-01-17 00:19:06 +00:00
|
|
|
|
2014-03-05 23:04:40 +01:00
|
|
|
# Some packages may have build scripts requiring python2.
|
2014-04-06 09:35:15 +02:00
|
|
|
# Only install the python symlink in the host tree if python3 is not enabled
|
|
|
|
|
# for the target, otherwise the default python program may be missing.
|
|
|
|
|
ifneq ($(BR2_PACKAGE_PYTHON3),y)
|
2014-03-05 23:04:40 +01:00
|
|
|
define HOST_PYTHON_INSTALL_PYTHON_SYMLINK
|
2017-07-05 13:14:19 +02:00
|
|
|
ln -sf python2 $(HOST_DIR)/bin/python
|
|
|
|
|
ln -sf python2-config $(HOST_DIR)/bin/python-config
|
2014-03-05 23:04:40 +01:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
HOST_PYTHON_POST_INSTALL_HOOKS += HOST_PYTHON_INSTALL_PYTHON_SYMLINK
|
|
|
|
|
endif
|
|
|
|
|
|
2014-02-13 21:48:50 +01:00
|
|
|
# Provided to other packages
|
package/pkg-python: fix for per-package directories
With per-package directory support, Python external modules are
causing a problem: the _sysconfigdata.py module installed by the
Python interpreter contains a number of paths that are relative to the
current package per-package directory, i.e python or python3. For
example:
'BLDSHARED': '/home/thomas/projets/buildroot/output/per-package/python/host/bin/arm-linux-gcc -shared',
'CC': '/home/thomas/projets/buildroot/output/per-package/python/host/bin/arm-linux-gcc',
'CXX': '/home/thomas/projets/buildroot/output/per-package/python/host/bin/arm-linux-g++',
etc.
These paths are problematic, because it means that the wrong compiler
gets used when building external Python modules: instead of using the
compiler from the external Python module per-package host directory,
it uses the one from the 'python' or 'python3' per-package host
directory. Due to this, any native dependency needed by the external
Python module is not found, even though it is properly present in the
current package per-package directory.
Of course, the problem occurs with both target Python modules and host
Python modules.
To fix this, we simply rewrite those paths in _sysconfigdata.py before
building a Python package.
Interestingly, until now, the _sysconfidata.py that was used during
the build was the one from $(TARGET_DIR), which is a bit unusual: it
is more common to use files from $(STAGING_DIR) during the build
process. So this commit changes the PYTHON_PATH and PYTHON3_PATH
variables so that they point to $(STAGING_DIR), which makes the
_sysconfigdata.py fixup in $(STAGING_DIR) effective.
Fixes:
http://autobuild.buildroot.net/results/a24b0555fd4261b50dc3986635c30717d9cbe764/ (python-psycopg2)
http://autobuild.buildroot.net/results/080fa893e1b0e7a8c8a31ac1c98eb8871b97264d/ (python-alsaaudio)
http://autobuild.buildroot.net/results/79bc070f98d6d9d8ef78df12b248cdc7d0e405c3/ (python-lxml)
and many more Python packages that use native code with a native library
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2020-02-18 00:50:47 +01:00
|
|
|
PYTHON_PATH = $(STAGING_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/sysconfigdata/
|
2014-02-13 21:48:50 +01:00
|
|
|
|
2012-07-03 00:07:32 +02:00
|
|
|
$(eval $(autotools-package))
|
2012-07-03 00:06:54 +02:00
|
|
|
$(eval $(host-autotools-package))
|
2014-09-30 23:39:01 +02:00
|
|
|
|
2016-12-20 14:46:23 +01:00
|
|
|
ifeq ($(BR2_REPRODUCIBLE),y)
|
|
|
|
|
define PYTHON_FIX_TIME
|
|
|
|
|
find $(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR) -name '*.py' -print0 | \
|
|
|
|
|
xargs -0 --no-run-if-empty touch -d @$(SOURCE_DATE_EPOCH)
|
|
|
|
|
endef
|
|
|
|
|
endif
|
|
|
|
|
|
2016-05-17 23:19:15 +02:00
|
|
|
define PYTHON_CREATE_PYC_FILES
|
2016-12-20 14:46:23 +01:00
|
|
|
$(PYTHON_FIX_TIME)
|
2016-05-17 23:19:15 +02:00
|
|
|
PYTHONPATH="$(PYTHON_PATH)" \
|
2017-07-05 13:14:19 +02:00
|
|
|
cd $(TARGET_DIR) && $(HOST_DIR)/bin/python$(PYTHON_VERSION_MAJOR) \
|
2016-12-20 14:46:26 +01:00
|
|
|
$(TOPDIR)/support/scripts/pycompile.py \
|
|
|
|
|
$(if $(BR2_REPRODUCIBLE),--force) \
|
|
|
|
|
usr/lib/python$(PYTHON_VERSION_MAJOR)
|
2016-05-17 23:19:15 +02:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY)$(BR2_PACKAGE_PYTHON_PY_PYC),y)
|
2016-06-22 21:07:37 +02:00
|
|
|
PYTHON_TARGET_FINALIZE_HOOKS += PYTHON_CREATE_PYC_FILES
|
2016-05-17 23:19:15 +02:00
|
|
|
endif
|
|
|
|
|
|
2014-09-30 23:39:01 +02:00
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY),y)
|
2016-05-01 22:15:13 +02:00
|
|
|
define PYTHON_REMOVE_PY_FILES
|
package/{pkg-generic, python, python3}: add mechanism to exclude .py files from removal
When BR2_PACKAGE_PYTHON{,3}_PYC_ONLY=y, we force remove all .py files
from the system, as they have all been byte-compiled into their .pyc
variants.
However, it turns out that some packages (e.g: OpenCV) do some funky
things with a few .py files: they pass them through Python's
execfile() facility, which only works with .py files and not .pyc
files. It is used by OpenCV for example to read two small
configuration files.
In order to support such use cases, this commit introduces a very
simple mechanism by which packages can exclude some path patterns from
the .py removal: a per-package <pkg>_KEEP_PY_FILES variable that is
collected into a global PYTHON_KEEP_PY_FILES variable, then used by
the python/python3 target-finalize hooks.
This variable is intentionally not documented, this is really a hack
that we ideally would like to see go away, and we'd rather not see its
usage spread too much.
This is necessary to be able to fix bug #12171.
[Peter: check if PYTHON_KEEP_PY_FILES contains non-white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-11-29 20:07:05 +01:00
|
|
|
find $(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR) -name '*.py' \
|
2019-12-01 21:55:37 +01:00
|
|
|
$(if $(strip $(KEEP_PYTHON_PY_FILES)),-not \( $(call finddirclauses,$(TARGET_DIR),$(KEEP_PYTHON_PY_FILES)) \) ) \
|
package/{pkg-generic, python, python3}: add mechanism to exclude .py files from removal
When BR2_PACKAGE_PYTHON{,3}_PYC_ONLY=y, we force remove all .py files
from the system, as they have all been byte-compiled into their .pyc
variants.
However, it turns out that some packages (e.g: OpenCV) do some funky
things with a few .py files: they pass them through Python's
execfile() facility, which only works with .py files and not .pyc
files. It is used by OpenCV for example to read two small
configuration files.
In order to support such use cases, this commit introduces a very
simple mechanism by which packages can exclude some path patterns from
the .py removal: a per-package <pkg>_KEEP_PY_FILES variable that is
collected into a global PYTHON_KEEP_PY_FILES variable, then used by
the python/python3 target-finalize hooks.
This variable is intentionally not documented, this is really a hack
that we ideally would like to see go away, and we'd rather not see its
usage spread too much.
This is necessary to be able to fix bug #12171.
[Peter: check if PYTHON_KEEP_PY_FILES contains non-white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-11-29 20:07:05 +01:00
|
|
|
-print0 | \
|
2016-05-17 23:19:13 +02:00
|
|
|
xargs -0 --no-run-if-empty rm -f
|
2014-09-30 23:39:01 +02:00
|
|
|
endef
|
2016-06-22 21:07:37 +02:00
|
|
|
PYTHON_TARGET_FINALIZE_HOOKS += PYTHON_REMOVE_PY_FILES
|
2014-09-30 23:39:01 +02:00
|
|
|
endif
|
|
|
|
|
|
2016-05-17 23:19:15 +02:00
|
|
|
# Normally, *.pyc files should not have been compiled, but just in
|
|
|
|
|
# case, we make sure we remove all of them.
|
2014-09-30 23:39:01 +02:00
|
|
|
ifeq ($(BR2_PACKAGE_PYTHON_PY_ONLY),y)
|
2016-05-01 22:15:13 +02:00
|
|
|
define PYTHON_REMOVE_PYC_FILES
|
2016-05-17 23:19:13 +02:00
|
|
|
find $(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR) -name '*.pyc' -print0 | \
|
|
|
|
|
xargs -0 --no-run-if-empty rm -f
|
2014-09-30 23:39:01 +02:00
|
|
|
endef
|
2016-06-22 21:07:37 +02:00
|
|
|
PYTHON_TARGET_FINALIZE_HOOKS += PYTHON_REMOVE_PYC_FILES
|
2014-09-30 23:39:01 +02:00
|
|
|
endif
|
2016-05-01 22:15:14 +02:00
|
|
|
|
|
|
|
|
# In all cases, we don't want to keep the optimized .pyo files
|
|
|
|
|
define PYTHON_REMOVE_PYO_FILES
|
2016-05-17 23:19:13 +02:00
|
|
|
find $(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR) -name '*.pyo' -print0 | \
|
|
|
|
|
xargs -0 --no-run-if-empty rm -f
|
2016-05-01 22:15:14 +02:00
|
|
|
endef
|
2016-06-22 21:07:37 +02:00
|
|
|
PYTHON_TARGET_FINALIZE_HOOKS += PYTHON_REMOVE_PYO_FILES
|